ANIONIC DRY STRENGTH
Introduction
JANCHEM- ADS can play an excellent dry strength effect in a papermaking system with a small amount of aluminum sulfate added.
Adaptive system in a wide range of pH (5.5～7.5) not only shows excellent dry strength effect, but also improves retention and drainage performance.
In addition, even in a papermaking system with many anionic impurities or high electrical conductivity, it can exert excellent dry strength effect.
PROPERTIES
Appearance : White turbid to light brown liquid
Ionicity : Anionic
Total solids (%) : 9.5–10.0
pH value : 2.5–4.5
Viscosity (mPa·s, 25°C) : 7,000 ± 3,000
Specific gravity (25°C) : 1.07 ± 0.01
Shelf life (months) : 6 (5–30°C)
Advantage
Effective in wide dosage.
An effect is hard to reach the ceiling, even if high addition percentage.
Good performance even in the less alum system.
Effective even in the higher anionic and high electro-conductive conditions.
Improved runnability for excellent drainage and retention.
Possible to reduce dye, retention aids, and decrease dryer steam, and improve machine speed.
Application
Janchem – ADS should be diluted more than 10 times before addition to pulp slurry. Use of continuous dilution unit for high viscosity solution will be recommended.
Handling
Janchem ADS is stable for 6 months. Please avoid direct sunlight, high temperature or freezing. It is not recommended to store the diluted solution of LQ4801 for a long time. Diluted product will lose its efficiency in a short period of time. Do not mix with other chemicals directly.
Container
Janchem ADS is stable for 6 months. Please avoid direct sunlight, high temperature or freezing. It is not recommended to store the diluted solution of LQ4801 for a long time. Diluted product will lose its efficiency in a short period of time. Do not mix with other chemicals directly.
