ANIONIC POLYACRYLAMIDE
KATFLOC AP 310 H flocculant is a high molecular weight, very low anionic, polyacrylamides supplied in powder from.
Typical Propertris
Appearance White free flowing granular powder
Bulk density (g/cm3) 0.7 – 0.8
Particle Size (mm) 1
Molecular weight (millions) >15
pH (5 g/l solution) 6 – 8
Viscosity 5 g/l solution (cps) 1200
Solution Strength (g/l)
- Maximum 10
- Recommended 3
Storage Stability
- Solution (days) 5
- Dry Product (years) 2
Dosage 0.1 – 10 ppm
Application :
KATFLOC AP 310 H used in conjunction with a primary coagulant, both of inorganic ( eg Alum, Ferric, PAC ) and organic in the treatment of raw water potable usage .
STORAGE & HANDLING
Flocculants are hygroscopic. Store in dry place at a temperature below 35 0C . Do not store outside spillage should be cleaned up rapidly, surface become very slippery. Hazardous if flocculants are spread on the floor .
